Raw materials undergo visual examination and chemical analysis

Once cleared, they are cut into the required sizes.

Materials pass through the preheating and soaking zones in the furnace and non attaining the required temperature

Conveyors are used to feed the materials to Roughing Mill, specific to bar diameter.

After the exit, the materials are fed to the Finishing Mill for manufacturing small diameter bars. Materials obtained from Finishing Mills then pass through the cooling system with predetermined cooling parameters to produce TMT bars.

The treated bars are left on the cooling bed to acquire the desirable mechanical properties through tampering of the water quenched surface.

The bars then pass through shearing machine to cut them into desired lengths.

Quality testing is done as per the defined norms.

Afterwards, the bars are bent, bunched, tagged and stored for dispatch.